Some time ago, some netizens said that after their car was sent for inspection, they actually found a gps tracker with temperature sensor in the exhaust. Because the locator was determined not to be installed by the owner and his family, the owner soon went to the police to report the case, and the investigation of the current case is unknown. But there are also many netizens have questions:

First, the installation position of the GPS locator

First of all, let's talk about the installation of GPS locator taboos. First, the GPS locator must not be installed at extremely high temperatures. Generally, the working temperature of the GPS locator is between -20 ° C and 75 ° C (the specific number should refer to the product model description), and too low or too high temperature and humidity will cause the locator to suspend work. Therefore, the locator should generally avoid being installed near the air conditioning pipe, roof and exhaust pipe.

Second, the locator should not be installed in excessively wet places. The working humidity of the positioner is usually required to be controlled between 20% and 80%RH (the specific number should refer to the model description of the product). When installing the locator, you should choose a position that is not easy to water to ensure that the terminal is dry, such as avoiding installation under the wiper, and pay attention to stay away from the air conditioning outlet to prevent condensation water accumulation in the terminal when the temperature difference changes, which seriously affects the service life of the product.

Third, the locator can not be installed in the area of interference. When installing a GPS locator, avoid placing the locator together with the transmitting source, such as reversing radar, walkie-talkies and other vehicle communication equipment. At the same time, ensure that the front of the host is facing up, and there is no metal above it, and the horizontal tilt Angle is controlled within 15°, so that the locator can receive signals.

Second, can the locator be installed in the car exhaust cylinder?

Looking at this problem in combination with the above, it can be concluded that the gps tracker with temperature sensor cannot be installed in the exhaust pipe of the car.

No matter how good the locator can not stand high temperature and water immersion, the locator is placed in the position of the exhaust cylinder, the locator is susceptible to rain soaking, and as long as the vehicle is opened, the temperature of the exhaust cylinder position is higher than other places, the locator can not withstand, naturally it is easy to break.

In addition, a better locator is hundreds of dollars, normal people under normal circumstances, will not put the locator in the position of the exhaust cylinder.

gps tracker with temperature sensor https://www.eelinktracker.com/waterproof-bluetooth-GPS-temperature-tracker-BTT01-with-high-accuracy-temperature-sensor-.html